423 lines
18 KiB
C++
423 lines
18 KiB
C++
#pragma once
|
|
|
|
/// @file fastspi_bitbang.h
|
|
/// Software SPI (aka bit-banging) support
|
|
|
|
#ifndef __INC_FASTSPI_BITBANG_H
|
|
#define __INC_FASTSPI_BITBANG_H
|
|
|
|
#include "FastLED.h"
|
|
|
|
#include "fastled_delay.h"
|
|
#include "fl/force_inline.h"
|
|
|
|
FASTLED_NAMESPACE_BEGIN
|
|
|
|
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
/// Software SPI (aka bit-banging) support
|
|
/// Includes aggressive optimizations for when the clock and data pin are on the same port.
|
|
/// @tparam DATA_PIN pin number of the SPI data pin.
|
|
/// @tparam CLOCK_PIN pin number of the SPI clock pin.
|
|
/// @tparam SPI_SPEED speed of the bus. Determines the delay times between pin writes.
|
|
/// @note Although this is named with the "AVR" prefix, this will work on any platform. Theoretically.
|
|
/// @todo Replace the select pin definition with a set of pins, to allow using mux hardware for routing in the future.
|
|
template <uint8_t DATA_PIN, uint8_t CLOCK_PIN, uint32_t SPI_SPEED>
|
|
class AVRSoftwareSPIOutput {
|
|
// The data types for pointers to the pin port - typedef'd here from the ::Pin definition because on AVR these
|
|
// are pointers to 8 bit values, while on ARM they are 32 bit
|
|
typedef typename FastPin<DATA_PIN>::port_ptr_t data_ptr_t;
|
|
typedef typename FastPin<CLOCK_PIN>::port_ptr_t clock_ptr_t;
|
|
|
|
// The data type for what's at a pin's port - typedef'd here from the Pin definition because on avr the ports
|
|
// are 8 bits wide while on arm they are 32.
|
|
typedef typename FastPin<DATA_PIN>::port_t data_t;
|
|
typedef typename FastPin<CLOCK_PIN>::port_t clock_t;
|
|
Selectable *m_pSelect; ///< SPI chip select
|
|
|
|
public:
|
|
/// Default constructor
|
|
AVRSoftwareSPIOutput() { m_pSelect = NULL; }
|
|
/// Constructor with selectable for SPI chip select
|
|
AVRSoftwareSPIOutput(Selectable *pSelect) { m_pSelect = pSelect; }
|
|
|
|
/// Set the pointer for the SPI chip select
|
|
/// @param pSelect pointer to chip select control
|
|
void setSelect(Selectable *pSelect) { m_pSelect = pSelect; }
|
|
|
|
/// Set the clock/data pins to output and make sure the chip select is released.
|
|
void init() {
|
|
// set the pins to output and make sure the select is released (which apparently means hi? This is a bit
|
|
// confusing to me)
|
|
FastPin<DATA_PIN>::setOutput();
|
|
FastPin<CLOCK_PIN>::setOutput();
|
|
release();
|
|
}
|
|
|
|
/// Stop the SPI output.
|
|
/// Pretty much a NOP with software, as there's no registers to kick
|
|
static void stop() { }
|
|
|
|
/// Wait until the SPI subsystem is ready for more data to write.
|
|
/// A NOP when bitbanging.
|
|
static void wait() __attribute__((always_inline)) { }
|
|
/// @copydoc AVRSoftwareSPIOutput::wait()
|
|
static void waitFully() __attribute__((always_inline)) { wait(); }
|
|
|
|
/// Write a single byte over SPI without waiting.
|
|
static void writeByteNoWait(uint8_t b) __attribute__((always_inline)) { writeByte(b); }
|
|
/// Write a single byte over SPI and wait afterwards.
|
|
static void writeBytePostWait(uint8_t b) __attribute__((always_inline)) { writeByte(b); wait(); }
|
|
|
|
/// Write a word (two bytes) over SPI.
|
|
static void writeWord(uint16_t w) __attribute__((always_inline)) { writeByte(w>>8); writeByte(w&0xFF); }
|
|
|
|
/// Write a single byte over SPI.
|
|
/// Naive implelentation, simply calls writeBit() on the 8 bits in the byte.
|
|
static void writeByte(uint8_t b) {
|
|
writeBit<7>(b);
|
|
writeBit<6>(b);
|
|
writeBit<5>(b);
|
|
writeBit<4>(b);
|
|
writeBit<3>(b);
|
|
writeBit<2>(b);
|
|
writeBit<1>(b);
|
|
writeBit<0>(b);
|
|
}
|
|
|
|
private:
|
|
/// writeByte() implementation with data/clock registers passed in.
|
|
static void writeByte(uint8_t b, clock_ptr_t clockpin, data_ptr_t datapin) {
|
|
writeBit<7>(b, clockpin, datapin);
|
|
writeBit<6>(b, clockpin, datapin);
|
|
writeBit<5>(b, clockpin, datapin);
|
|
writeBit<4>(b, clockpin, datapin);
|
|
writeBit<3>(b, clockpin, datapin);
|
|
writeBit<2>(b, clockpin, datapin);
|
|
writeBit<1>(b, clockpin, datapin);
|
|
writeBit<0>(b, clockpin, datapin);
|
|
}
|
|
|
|
/// writeByte() implementation with the data register passed in and prebaked values for data hi w/clock hi and
|
|
/// low and data lo w/clock hi and lo. This is to be used when clock and data are on the same GPIO register,
|
|
/// can get close to getting a bit out the door in 2 clock cycles!
|
|
static void writeByte(uint8_t b, data_ptr_t datapin,
|
|
data_t hival, data_t loval,
|
|
clock_t hiclock, clock_t loclock) {
|
|
writeBit<7>(b, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<6>(b, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<5>(b, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<4>(b, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<3>(b, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<2>(b, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<1>(b, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<0>(b, datapin, hival, loval, hiclock, loclock);
|
|
}
|
|
|
|
/// writeByte() implementation with not just registers passed in, but pre-baked values for said registers for
|
|
/// data hi/lo and clock hi/lo values.
|
|
/// @note Weird things will happen if this method is called in cases where
|
|
/// the data and clock pins are on the same port! Don't do that!
|
|
static void writeByte(uint8_t b, clock_ptr_t clockpin, data_ptr_t datapin,
|
|
data_t hival, data_t loval,
|
|
clock_t hiclock, clock_t loclock) {
|
|
writeBit<7>(b, clockpin, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<6>(b, clockpin, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<5>(b, clockpin, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<4>(b, clockpin, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<3>(b, clockpin, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<2>(b, clockpin, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<1>(b, clockpin, datapin, hival, loval, hiclock, loclock);
|
|
writeBit<0>(b, clockpin, datapin, hival, loval, hiclock, loclock);
|
|
}
|
|
|
|
public:
|
|
|
|
#if defined(FASTLED_TEENSY4)
|
|
#define DELAY_NS (1000 / (SPI_SPEED/1000000))
|
|
#define CLOCK_HI_DELAY do { delayNanoseconds((DELAY_NS/4)); } while(0);
|
|
#define CLOCK_LO_DELAY do { delayNanoseconds((DELAY_NS/4)); } while(0);
|
|
#else
|
|
/// We want to make sure that the clock pulse is held high for a minimum of 35 ns.
|
|
#define MIN_DELAY ((NS(35)>3) ? (NS(35) - 3) : 1)
|
|
|
|
/// Delay for the clock signal 'high' period
|
|
#define CLOCK_HI_DELAY do { delaycycles<MIN_DELAY>(); delaycycles<((SPI_SPEED > 10) ? (((SPI_SPEED-6) / 2) - MIN_DELAY) : (SPI_SPEED))>(); } while(0);
|
|
/// Delay for the clock signal 'low' period
|
|
#define CLOCK_LO_DELAY do { delaycycles<((SPI_SPEED > 10) ? ((SPI_SPEED-6) / 2) : (SPI_SPEED))>(); } while(0);
|
|
#endif
|
|
|
|
/// Write the BIT'th bit out via SPI, setting the data pin then strobing the clock
|
|
/// @tparam BIT the bit index in the byte
|
|
/// @param b the byte to read the bit from
|
|
template <uint8_t BIT> __attribute__((always_inline, hot)) inline static void writeBit(uint8_t b) {
|
|
//cli();
|
|
if(b & (1 << BIT)) {
|
|
FastPin<DATA_PIN>::hi();
|
|
#ifdef ESP32
|
|
// try to ensure we never have adjacent write opcodes to the same register
|
|
FastPin<CLOCK_PIN>::lo();
|
|
FastPin<CLOCK_PIN>::hi(); CLOCK_HI_DELAY;
|
|
FastPin<CLOCK_PIN>::toggle(); CLOCK_LO_DELAY;
|
|
#else
|
|
FastPin<CLOCK_PIN>::hi(); CLOCK_HI_DELAY;
|
|
FastPin<CLOCK_PIN>::lo(); CLOCK_LO_DELAY;
|
|
#endif
|
|
} else {
|
|
FastPin<DATA_PIN>::lo();
|
|
FastPin<CLOCK_PIN>::hi(); CLOCK_HI_DELAY;
|
|
#ifdef ESP32
|
|
// try to ensure we never have adjacent write opcodes to the same register
|
|
FastPin<CLOCK_PIN>::toggle(); CLOCK_HI_DELAY;
|
|
#else
|
|
FastPin<CLOCK_PIN>::lo(); CLOCK_LO_DELAY;
|
|
#endif
|
|
}
|
|
//sei();
|
|
}
|
|
|
|
private:
|
|
/// Write the BIT'th bit out via SPI, setting the data pin then strobing the clock, using the passed in pin registers to accelerate access if needed
|
|
template <uint8_t BIT> FASTLED_FORCE_INLINE static void writeBit(uint8_t b, clock_ptr_t clockpin, data_ptr_t datapin) {
|
|
if(b & (1 << BIT)) {
|
|
FastPin<DATA_PIN>::hi(datapin);
|
|
FastPin<CLOCK_PIN>::hi(clockpin); CLOCK_HI_DELAY;
|
|
FastPin<CLOCK_PIN>::lo(clockpin); CLOCK_LO_DELAY;
|
|
} else {
|
|
FastPin<DATA_PIN>::lo(datapin);
|
|
FastPin<CLOCK_PIN>::hi(clockpin); CLOCK_HI_DELAY;
|
|
FastPin<CLOCK_PIN>::lo(clockpin); CLOCK_LO_DELAY;
|
|
}
|
|
|
|
}
|
|
|
|
/// The version of writeBit() to use when clock and data are on separate pins with precomputed values for setting
|
|
/// the clock and data pins
|
|
template <uint8_t BIT> FASTLED_FORCE_INLINE static void writeBit(uint8_t b, clock_ptr_t clockpin, data_ptr_t datapin,
|
|
data_t hival, data_t loval, clock_t hiclock, clock_t loclock) {
|
|
// // only need to explicitly set clock hi if clock and data are on different ports
|
|
if(b & (1 << BIT)) {
|
|
FastPin<DATA_PIN>::fastset(datapin, hival);
|
|
FastPin<CLOCK_PIN>::fastset(clockpin, hiclock); CLOCK_HI_DELAY;
|
|
FastPin<CLOCK_PIN>::fastset(clockpin, loclock); CLOCK_LO_DELAY;
|
|
} else {
|
|
// FL_NOP;
|
|
FastPin<DATA_PIN>::fastset(datapin, loval);
|
|
FastPin<CLOCK_PIN>::fastset(clockpin, hiclock); CLOCK_HI_DELAY;
|
|
FastPin<CLOCK_PIN>::fastset(clockpin, loclock); CLOCK_LO_DELAY;
|
|
}
|
|
}
|
|
|
|
/// The version of writeBit() to use when clock and data are on the same port with precomputed values for the various
|
|
/// combinations
|
|
template <uint8_t BIT> FASTLED_FORCE_INLINE static void writeBit(uint8_t b, data_ptr_t clockdatapin,
|
|
data_t datahiclockhi, data_t dataloclockhi,
|
|
data_t datahiclocklo, data_t dataloclocklo) {
|
|
#if 0
|
|
writeBit<BIT>(b);
|
|
#else
|
|
if(b & (1 << BIT)) {
|
|
FastPin<DATA_PIN>::fastset(clockdatapin, datahiclocklo);
|
|
FastPin<DATA_PIN>::fastset(clockdatapin, datahiclockhi); CLOCK_HI_DELAY;
|
|
FastPin<DATA_PIN>::fastset(clockdatapin, datahiclocklo); CLOCK_LO_DELAY;
|
|
} else {
|
|
// FL_NOP;
|
|
FastPin<DATA_PIN>::fastset(clockdatapin, dataloclocklo);
|
|
FastPin<DATA_PIN>::fastset(clockdatapin, dataloclockhi); CLOCK_HI_DELAY;
|
|
FastPin<DATA_PIN>::fastset(clockdatapin, dataloclocklo); CLOCK_LO_DELAY;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
public:
|
|
|
|
/// Select the SPI output (chip select)
|
|
/// @todo Research whether this really means 'hi' or 'lo'.
|
|
/// @par
|
|
/// @todo Move select responsibility out of the SPI classes entirely,
|
|
/// make it up to the caller to remember to lock/select the line?
|
|
void select() { if(m_pSelect != NULL) { m_pSelect->select(); } } // FastPin<SELECT_PIN>::hi(); }
|
|
|
|
/// Release the SPI chip select line
|
|
void release() { if(m_pSelect != NULL) { m_pSelect->release(); } } // FastPin<SELECT_PIN>::lo(); }
|
|
|
|
/// Write multiple bytes of the given value over SPI.
|
|
/// Useful for quickly flushing, say, a line of 0's down the line.
|
|
/// @param value the value to write to the bus
|
|
/// @param len how many copies of the value to write
|
|
void writeBytesValue(uint8_t value, int len) {
|
|
select();
|
|
writeBytesValueRaw(value, len);
|
|
release();
|
|
}
|
|
|
|
/// Write multiple bytes of the given value over SPI, without selecting the interface.
|
|
/// @copydetails AVRSoftwareSPIOutput::writeBytesValue(uint8_t, int)
|
|
static void writeBytesValueRaw(uint8_t value, int len) {
|
|
#ifdef FAST_SPI_INTERRUPTS_WRITE_PINS
|
|
// TODO: Weird things may happen if software bitbanging SPI output and other pins on the output reigsters are being twiddled. Need
|
|
// to allow specifying whether or not exclusive i/o access is allowed during this process, and if i/o access is not allowed fall
|
|
// back to the degenerative code below
|
|
while(len--) {
|
|
writeByte(value);
|
|
}
|
|
#else
|
|
FASTLED_REGISTER data_ptr_t datapin = FastPin<DATA_PIN>::port();
|
|
|
|
if(FastPin<DATA_PIN>::port() != FastPin<CLOCK_PIN>::port()) {
|
|
// If data and clock are on different ports, then writing a bit will consist of writing the value foor
|
|
// the bit (hi or low) to the data pin port, and then two writes to the clock port to strobe the clock line
|
|
FASTLED_REGISTER clock_ptr_t clockpin = FastPin<CLOCK_PIN>::port();
|
|
FASTLED_REGISTER data_t datahi = FastPin<DATA_PIN>::hival();
|
|
FASTLED_REGISTER data_t datalo = FastPin<DATA_PIN>::loval();
|
|
FASTLED_REGISTER clock_t clockhi = FastPin<CLOCK_PIN>::hival();
|
|
FASTLED_REGISTER clock_t clocklo = FastPin<CLOCK_PIN>::loval();
|
|
while(len--) {
|
|
writeByte(value, clockpin, datapin, datahi, datalo, clockhi, clocklo);
|
|
}
|
|
|
|
} else {
|
|
// If data and clock are on the same port then we can combine setting the data and clock pins
|
|
FASTLED_REGISTER data_t datahi_clockhi = FastPin<DATA_PIN>::hival() | FastPin<CLOCK_PIN>::mask();
|
|
FASTLED_REGISTER data_t datalo_clockhi = FastPin<DATA_PIN>::loval() | FastPin<CLOCK_PIN>::mask();
|
|
FASTLED_REGISTER data_t datahi_clocklo = FastPin<DATA_PIN>::hival() & ~FastPin<CLOCK_PIN>::mask();
|
|
FASTLED_REGISTER data_t datalo_clocklo = FastPin<DATA_PIN>::loval() & ~FastPin<CLOCK_PIN>::mask();
|
|
|
|
while(len--) {
|
|
writeByte(value, datapin, datahi_clockhi, datalo_clockhi, datahi_clocklo, datalo_clocklo);
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/// Write an array of data to the SPI interface.
|
|
/// @tparam D Per-byte modifier class, e.g. ::DATA_NOP
|
|
/// @param data pointer to data to write
|
|
/// @param len number of bytes to write
|
|
/// @todo Need to type this better so that explicit casts into the call aren't required.
|
|
template <class D> void writeBytes(FASTLED_REGISTER uint8_t *data, int len) {
|
|
select();
|
|
#ifdef FAST_SPI_INTERRUPTS_WRITE_PINS
|
|
uint8_t *end = data + len;
|
|
while(data != end) {
|
|
writeByte(D::adjust(*data++));
|
|
}
|
|
#else
|
|
FASTLED_REGISTER clock_ptr_t clockpin = FastPin<CLOCK_PIN>::port();
|
|
FASTLED_REGISTER data_ptr_t datapin = FastPin<DATA_PIN>::port();
|
|
|
|
if(FastPin<DATA_PIN>::port() != FastPin<CLOCK_PIN>::port()) {
|
|
// If data and clock are on different ports, then writing a bit will consist of writing the value foor
|
|
// the bit (hi or low) to the data pin port, and then two writes to the clock port to strobe the clock line
|
|
FASTLED_REGISTER data_t datahi = FastPin<DATA_PIN>::hival();
|
|
FASTLED_REGISTER data_t datalo = FastPin<DATA_PIN>::loval();
|
|
FASTLED_REGISTER clock_t clockhi = FastPin<CLOCK_PIN>::hival();
|
|
FASTLED_REGISTER clock_t clocklo = FastPin<CLOCK_PIN>::loval();
|
|
uint8_t *end = data + len;
|
|
|
|
while(data != end) {
|
|
writeByte(D::adjust(*data++), clockpin, datapin, datahi, datalo, clockhi, clocklo);
|
|
}
|
|
|
|
} else {
|
|
// FastPin<CLOCK_PIN>::hi();
|
|
// If data and clock are on the same port then we can combine setting the data and clock pins
|
|
FASTLED_REGISTER data_t datahi_clockhi = FastPin<DATA_PIN>::hival() | FastPin<CLOCK_PIN>::mask();
|
|
FASTLED_REGISTER data_t datalo_clockhi = FastPin<DATA_PIN>::loval() | FastPin<CLOCK_PIN>::mask();
|
|
FASTLED_REGISTER data_t datahi_clocklo = FastPin<DATA_PIN>::hival() & ~FastPin<CLOCK_PIN>::mask();
|
|
FASTLED_REGISTER data_t datalo_clocklo = FastPin<DATA_PIN>::loval() & ~FastPin<CLOCK_PIN>::mask();
|
|
|
|
uint8_t *end = data + len;
|
|
|
|
while(data != end) {
|
|
writeByte(D::adjust(*data++), datapin, datahi_clockhi, datalo_clockhi, datahi_clocklo, datalo_clocklo);
|
|
}
|
|
// FastPin<CLOCK_PIN>::lo();
|
|
}
|
|
#endif
|
|
D::postBlock(len);
|
|
release();
|
|
}
|
|
|
|
/// Write an array of data to the SPI interface.
|
|
/// @param data pointer to data to write
|
|
/// @param len number of bytes to write
|
|
void writeBytes(FASTLED_REGISTER uint8_t *data, int len) { writeBytes<DATA_NOP>(data, len); }
|
|
|
|
|
|
/// Write LED pixel data to the SPI interface.
|
|
/// Data is written in groups of three, re-ordered per the RGB_ORDER.
|
|
/// @tparam FLAGS Option flags, such as ::FLAG_START_BIT
|
|
/// @tparam D Per-byte modifier class, e.g. ::DATA_NOP
|
|
/// @tparam RGB_ORDER the rgb ordering for the LED data (e.g. what order red, green, and blue data is written out in)
|
|
/// @param pixels a ::PixelController with the LED data and modifier options
|
|
template <uint8_t FLAGS, class D, EOrder RGB_ORDER> __attribute__((noinline)) void writePixels(PixelController<RGB_ORDER> pixels, void* context = NULL) {
|
|
FASTLED_UNUSED(context);
|
|
select();
|
|
int len = pixels.mLen;
|
|
|
|
#ifdef FAST_SPI_INTERRUPTS_WRITE_PINS
|
|
// If interrupts or other things may be generating output while we're working on things, then we need
|
|
// to use this block
|
|
while(pixels.has(1)) {
|
|
if(FLAGS & FLAG_START_BIT) {
|
|
writeBit<0>(1);
|
|
}
|
|
writeByte(D::adjust(pixels.loadAndScale0()));
|
|
writeByte(D::adjust(pixels.loadAndScale1()));
|
|
writeByte(D::adjust(pixels.loadAndScale2()));
|
|
pixels.advanceData();
|
|
pixels.stepDithering();
|
|
}
|
|
#else
|
|
// If we can guaruntee that no one else will be writing data while we are running (namely, changing the values of the PORT/PDOR pins)
|
|
// then we can use a bunch of optimizations in here
|
|
FASTLED_REGISTER data_ptr_t datapin = FastPin<DATA_PIN>::port();
|
|
|
|
if(FastPin<DATA_PIN>::port() != FastPin<CLOCK_PIN>::port()) {
|
|
FASTLED_REGISTER clock_ptr_t clockpin = FastPin<CLOCK_PIN>::port();
|
|
// If data and clock are on different ports, then writing a bit will consist of writing the value foor
|
|
// the bit (hi or low) to the data pin port, and then two writes to the clock port to strobe the clock line
|
|
FASTLED_REGISTER data_t datahi = FastPin<DATA_PIN>::hival();
|
|
FASTLED_REGISTER data_t datalo = FastPin<DATA_PIN>::loval();
|
|
FASTLED_REGISTER clock_t clockhi = FastPin<CLOCK_PIN>::hival();
|
|
FASTLED_REGISTER clock_t clocklo = FastPin<CLOCK_PIN>::loval();
|
|
|
|
while(pixels.has(1)) {
|
|
if(FLAGS & FLAG_START_BIT) {
|
|
writeBit<0>(1, clockpin, datapin, datahi, datalo, clockhi, clocklo);
|
|
}
|
|
writeByte(D::adjust(pixels.loadAndScale0()), clockpin, datapin, datahi, datalo, clockhi, clocklo);
|
|
writeByte(D::adjust(pixels.loadAndScale1()), clockpin, datapin, datahi, datalo, clockhi, clocklo);
|
|
writeByte(D::adjust(pixels.loadAndScale2()), clockpin, datapin, datahi, datalo, clockhi, clocklo);
|
|
pixels.advanceData();
|
|
pixels.stepDithering();
|
|
}
|
|
|
|
} else {
|
|
// If data and clock are on the same port then we can combine setting the data and clock pins
|
|
FASTLED_REGISTER data_t datahi_clockhi = FastPin<DATA_PIN>::hival() | FastPin<CLOCK_PIN>::mask();
|
|
FASTLED_REGISTER data_t datalo_clockhi = FastPin<DATA_PIN>::loval() | FastPin<CLOCK_PIN>::mask();
|
|
FASTLED_REGISTER data_t datahi_clocklo = FastPin<DATA_PIN>::hival() & ~FastPin<CLOCK_PIN>::mask();
|
|
FASTLED_REGISTER data_t datalo_clocklo = FastPin<DATA_PIN>::loval() & ~FastPin<CLOCK_PIN>::mask();
|
|
|
|
while(pixels.has(1)) {
|
|
if(FLAGS & FLAG_START_BIT) {
|
|
writeBit<0>(1, datapin, datahi_clockhi, datalo_clockhi, datahi_clocklo, datalo_clocklo);
|
|
}
|
|
writeByte(D::adjust(pixels.loadAndScale0()), datapin, datahi_clockhi, datalo_clockhi, datahi_clocklo, datalo_clocklo);
|
|
writeByte(D::adjust(pixels.loadAndScale1()), datapin, datahi_clockhi, datalo_clockhi, datahi_clocklo, datalo_clocklo);
|
|
writeByte(D::adjust(pixels.loadAndScale2()), datapin, datahi_clockhi, datalo_clockhi, datahi_clocklo, datalo_clocklo);
|
|
pixels.advanceData();
|
|
pixels.stepDithering();
|
|
}
|
|
}
|
|
#endif
|
|
D::postBlock(len);
|
|
release();
|
|
}
|
|
};
|
|
|
|
FASTLED_NAMESPACE_END
|
|
|
|
#endif
|